1KW Range Hood Test Grease Absorption Performance 1200mm × 650mm × 700mm

Overview:

Based on relevant requirements stipulated in Appendix G of GB/T 17713-2011 Rang Hood, this

equipment is applied to testing the grease absorption performance of range hood.
 

It includes main cabinet, dripping system, temperature control system, independent filter and

auxiliary fan, of which the main cabinet is composed of upper and lower parts, which are balance

room and oil fume generation room respectively. Besides, made by stainless steel, the cabinet is

beautiful and elegant in appearance, and reasonable in internal layout. It is simple and convenient

to operate this equipment.
 

Technical parameters:
 

1. Testing station: Single-station
 

2. Type and specification of tested unit:
 

Type: Top suction range hood
 

Specification of range hood (mm): Within 1200 (W)×650 (D) ×700 (H);
 

3. Oil used for testing: Corn oil with viscosity of (70±10)mm2/s under 20 is recommended;
 

4. Independent filter: Absolute filtration efficiency against aerosol suspended matters is 99.995%;
 

5. Power supply of prototype: Single-phase variable frequency power supply, AC 110-300V

adjustable, 50-60Hz adjustable, capacity 1KW;
 

6. Temperature control accuracy: Temperature of the part 40mm away from the bottom edge of

pot is always kept within 290±10;
 

7. Dripping speed: All 69ml liquids will be dripped off within 30min±15s in a constant speed;
 

8. Power capacity: 3-phase AC 380V, 5KVA/50Hz;
 

9. Internal dimension of oil fume generation room(mm): About 1600(1300) W×700D×2000H;
 

Overall dimension(mm): About 2100(1800) W×700D×2650H.
 

10. Non-standard laboratory can be customized according to customers’ special requirements.