Coupler Line Temperature Rise Test Equipment With Three Core Rubber Insulated Cord

Scope of application: in line with IEC60320-1998.18 and GB17465-1998.18 and the national

standard of the technical standards for the design, for thermal conditions and thermal conditions

under the heat of the appliance coupler test.

That is to say, appliance couplers for use in hot and hot conditions shall be capable of

withstanding the heat generated by the apparatus or equipment to which they are connected or

for the construction of connectors for thermal and thermal conditions, Insulation will not overheat.

Test purpose: The rewirable connector shall be fitted with a three-core rubber insulated cord with

a cross-sectional area of 1.5 mm2. The non-rewirable connector shall be tested at the time of

delivery. The connector was inserted into the appliance input socket of the test device for 4 days

(96 hours).

The temperature of the pin base is maintained at 120 ° C ± 2 ° C for the entire duration of the

test, for use in connectors under thermal conditions; 155 ° C ± 2 ° C for connectors under extreme

heat conditions. 2) Working current: 10A; 3) Test temperature range: 0 ~ 199 ; 4) Temperature

meter accuracy: ± 2% ± 2d; 5) Time (1) Input voltage: AC: 220V ± 10% / 50Hz; Timer: 0.01S ~

99H99min; 6) equipped with high-precision K-type thermocouple.